Rhodium telluride chloride
RhTeClAlso called rhodium chalcohalide
- Band gap
- 0.8 eV
- Thickness
- ~0.57 nm per layer
- Stability
- Stable over the long term
- Most mature use
- lab
RhTeCl is the sibling of the Janus crystal RhSeCl, but it is not Janus itself. With tellurium in place of selenium the anions no longer separate onto opposite faces: tellurium and chlorine alternate in stripes on both sides of each layer, which gives the crystal a partly one-dimensional character (its flakes peel into needles) and lowers the band gap to about 0.8 eV. Described in 1997 as the first platinum-metal chalcogenide halide with a layered structure, it now shows how the size of the anion decides whether a Janus layer forms at all. Calculations predict a single layer to be a semiconductor with very mobile electrons, which has not yet been measured.
Crystal structure
They are coordination polyhedra. Only complete ones are drawn.
Three layers of RhTeCl. Each layer slides by about half a cell along both in-plane directions against the one below, so the stacking axis leans away from the layers (β = 118.8°): 5.69 Å between layers, two layers per cell. Cell from Köhler and Urland, Zeitschrift für anorganische und allgemeine Chemie 623, 583 (1997).
- Rh
- Te
- Cl
- Cell
- Rectangular, a = 6.65 Å, b = 3.64 Å
- Atoms per cell
- 6
- Rh–Te bonds
- 2.54–2.58 Å
- Rh–Cl bonds
- 2.51 and 2.54 Å
- Height
- 2.72 Å between the outer atom centres
How to recognise it
What Raman spectroscopy shows for RhTeCl crystals thinned with tape. Raman positions were measured with a 532 nm laser.
| Signal | Crystals and thin flakes |
|---|---|
| Strongest Raman peak | 99 cm−1 with red or near-infrared light (785–620 nm); the peak at 176 cm−1 takes over below about 590 nm |
| Other main peaks | 151, 228 and 249 cm−1 (Ag), among nine peaks in all |
| Interlayer modes | none: they are not Raman-active, and calculations place them at 24–27 and 40 cm−1 |
| Crossed polarisation | only the Bg peaks stay; with parallel polarisation the 176 cm−1 peak is strong only along one in-plane direction |
| Cooling from 300 to 10 K | peaks move by up to 6 cm−1 (0.008–0.020 cm−1 per kelvin), and their relative heights change |
RhTeCl splits into needles along b as it thins. According to calculations, a single layer’s vibrations differ from the crystal’s by less than 5 cm−1 in most cases, and the interlayer vibrations are not Raman-active, so Raman is a poor way to count its layers. Thickness is measured by atomic force microscopy instead. Besides 532 nm, the spectra were taken with 457, 660 and 785 nm lasers and a dye laser tuned between 570 and 720 nm.
Source: Schiemenz and colleagues, Inorganic Chemistry 65, 19169 (2026).
Key properties
- Tellurium and chlorine alternate in stripes on both faces of each layer, so unlike RhSeCl it is not a Janus material; its flakes are needle-shaped and its properties strongly direction-dependent
- A diamagnetic semiconductor with an indirect band gap of about 0.8 eV, as electron energy loss spectroscopy and photoluminescence confirm
- Stable only to about 600 °C; it decomposes at 761 °C, losing its chlorine and about half its tellurium
- All nine Raman-active vibrations are assigned; its Raman peaks shift with temperature faster than RhSeCl’s, by up to 0.020 cm−1 per kelvin
- Its interlayer vibrations are invisible to Raman and infrared spectroscopy; calculations place them at 24–27 and 40 cm−1
- Calculations predict a single layer to be a direct-gap semiconductor (2.16 or 2.49 eV, depending on the method) with electron mobility up to 1.5 × 104 cm2 V−1 s−1, untested so far
How it is made
- Black, platelet-shaped single crystals by chemical vapour transport, as in the first report of 1997
- An adaptation of that synthesis that uses TeCl4 as the chlorine source
- Mechanical exfoliation, which splits the crystals into needles along b as they thin
Uses, and how close they are
- Water-splitting photocatalysis and transistors only a few nanometres long (predicted by calculations)lab
Readiness runs lab → prototype → pilot → deployed.
Open problems
- Does a single layer have the direct gap and the high electron mobility that calculations predict?
- How do the alternating tellurium and chlorine stripes shape transport and optical response along and across them?
- Why does the larger tellurium anion turn the Janus order of RhSeCl into stripes?
Going deeper
Short notes for specialists. Choose a lens in the header and yours comes first.
Calculations predict a single RhTeCl layer to be a direct-gap semiconductor (2.16 or 2.49 eV, depending on the method), with electron mobility up to 1.5 × 104 cm2 V−1 s−1 and a cleavage energy of about 0.39 J m−2, promising for water splitting and transistors only a few nanometres long; none of this has been measured yet. Bader charges put a positive charge on tellurium and almost none on rhodium, so each face carries alternating stripes of positive tellurium and negative chlorine. That charge pattern is quite unlike RhSeCl’s, whose chlorine face is negative and selenium face nearly neutral.
Crystals grow by vapour transport and exfoliate with tape into needles elongated along b, so use polarisation-resolved measurements. Its interlayer vibrations are not Raman-active, so measure thickness by atomic force microscopy.
Too early for an engineering assessment: rhodium is expensive, there is no wafer-scale growth, and the predicted transistor and photocatalyst performance is untested.
In the research tracks
Growth methods
Key references
- RhTeCl – das erste Chalkogenidhalogenid eines Platinmetalls mit Schichtstrukturcited by 11doi:10.1002/zaac.19976230191
- Exploring the heteroanionic 2D materials RhSeCl and RhTeCl as promising semiconductor materialscited by 4doi:10.1039/D4DT01487A
- Lattice dynamics of van der Waals layered rhodium chalcochlorides: Janus RhSeCl and 1.5-dimensional RhTeCldoi:10.1021/acs.inorgchem.6c02052
- Electronic structure and transport properties of 2D RhTeCl: a NEGF-DFT studycited by 13doi:10.1039/c9nr07684k
- Theoretical investigation of monolayer RhTeCl semiconductors as photocatalysts for water splittingcited by 37doi:10.1021/acs.jpcc.9b09593
Download these references as BibTeX or RIS for Zotero, EndNote or Mendeley.